Datalogic Scanning DS1500 - Manual (Page 54)

DS1500
A
A DEFAULT CONFIGURATION
The following table shows the default values of the Standard Application Program
configuration Parameters.
Parameter Default Setting
Code Setup
Options for All Codes
Multi Label Disabled
Decoding Safety 1
Decoding Severity Level 3
Global No Read Character <CAN>
Code Position Test Disabled
ACB Disabled for all Codes
Code 1*
Code Type
Code 39
Check Digit Disabled
Check Digit Tx Disabled
Codabar Start/Stop Tx Disabled
Code Length Variable
Minimum Code Length 1
Maximum Code Length 48
Min. Position in Scan Line 0
Max. Position in Scan Line 54
Bar Count Variable
Matching String Character 1 Disabled
Matching String Character 2 Disabled
Matching String Character 3 Disabled
Matching String Character 4 Disabled
Local No Read Character <CAN>
*
Code 2-6 are disabled by default.
42