3 digital output (do), Digital output (do) – ADLINK USB-7250 User Manual
Page 13

Introduction
3
USB-7230/7250
1.4.3
Digital Output (DO)
USB-7230
USB-7250
Min. pulse width for change
of state (COS) detection
20.83 ns (software programmable)
Data transfer
Programmed I/O
Optical Isolated Frequency/Event Counter
Number of channels
2
Logic level
VIH=5~12V, VIL=0~1.5V
Event counter width
32-bit
Max. input frequency
(DC coupled)
1 MHz
Min. input frequency
(DC coupled)
0.1 Hz
Max. frequency error
0.5% (f≤50kHz)
1% (50kHz<f≤500kHz)
2% (500kHz<f≤1MHz)
Data transfer
Programmed I/O
Channels
16 (optical isolation)
Output type
Open drain MOSFET
Supply voltage
5-35VDC
Max. sink current
250 mA @ 100% duty (/channel)
Data transfer
Programmed I/O
Channels
8 (solid state relay, non-latching)
Contact rating
(/channel)
Max. switching power
60 W, 125 VA
Max. switching voltage
220 VDC, 250VAC
Max. switching current
2 A
Relay ON/OFF time Operate time
2 ms
Release time
1 ms
Contact resistance
75mΩ (max.)
Expected lifetime
50 VDC 0.1A (resistive), 1x10
6
operations
USB-7230
USB-7250