ADLINK USB-7250 - Manual (Page 33)

Getting Started 23
USB-7230/7250
2 Getting Started
2.1 Unpacking Checklist
Before unpacking, check the shipping carton for any damage. If
the shipping carton and/or contents are damaged, inform the
dealer immediately. Retain the shipping carton and packing
materials for inspection. Obtain authorization from the dealer
before returning any product to ADLINK. Ensure that the fol-
lowing items are included in the package.
X
USB-7230/7250
X
Stand
X
Two removable screw terminals
X USB cable (2-meter length)
X Railmount kit
X ADLINK All-in-One CD
X User’s manual
2.2 Connecting the USB-7230/7250 Module
1. Turn on the computer.
2. Connect the USB-7230/7250 module to one USB 2.0
port on the computer using the included USB cable.
3. The first time the USB-7230/7250 module is connected,
a New Hardware message appears. It will take a few
seconds to load the firmware. When loading is complete,
the LED indicator on the rear of the USB DAQ module
changes from amber to green and the New Hardware
message closes.
4. The USB-7230/7250 module can now be located in the
hardware Device Manager.
WARNING:
The appropriate driver must be installed before connection to
the computer system. See Section 1.5: Software Support for
driver support information.