ADLINK PXIS-2630 Series User Manual
Page 12
6 ● Installation
2.3 System monitoring
There are LEDs on the front panel for system monitoring, including
powers, temperature, and fans. Please refer to following for the detail
meaning of display status on LEDs.
System Monitoring
Power LED (Voltage : 3.3V, 5V, +12V, -12V)
Temperature
LED
Fan
LED
Alarm
LED
The Alarm Buzzer beeps continuously if any alarm occurs. When the
Alarm Buzzer beeps, users can check the LED on the front panel to find
out which kind of alarm occurs.
There is a black button labeled Alarm RST near by the Alarm LED on the
front panel. When the Alarm LED flashes and the Alarm Buzzer continues
beeping, you can push Alarm RST button to stop beeping.
Users can further refer to Chapter 4 for Troubleshooting.
o
Color:
Green
o
ON
while
supplied
o
Color:
Amber
o
ON for normal condition
o
Flashes if exceeds temperature
o
Color:
Green
o
ON while normal fan speed
o
Flashes if abnormal fan speed
o
Color:
Red
o
ON while normal condition
o
Flashes if alarm occurs