ADLINK PXIS-2630 Series - Manual (Page 35)

Pin Assignments • 29
J3 INH#: DC power inhibit signal
Pin # Signal Name
1 INH#
J3
2 GND
J2 PRST#: System reset signal
Pin # Signal Name
1 RST#
J2
2 GND
J1 FAL#: Power supply fail input
Pin # Signal Name
1 FAL#
J1
2 GND
J8: Connector for LED power status
Name Pin # Pin # Name
GND 8 7 +3.3V
GND 6 5 +5V
GND 4 3 -12V
J8
GND 2 1 +12V
J5: SMB (system managing bus) connector
Pin # Name
1 SMCLK
2 GND
3 SMDATA
4 V(I/O)
J5
5 ALERT
The SMB is connected to the P2 of the system slot.
JP1: PXI Bus Speed Control
Pin 1-2 Description
Short Short M66EN to ground to
force PCI bus run 33MHz
Open
(default)
PCI bus speed defined by
M66EN on the PXI bus