1 clear cmos (jp9), Figure 2-16: jp9 (clear cmos) settings – ADLINK PXI-3950 User Manual
Page 41
Advertising
I/O Connectors and Pin Assignments
27
2.4.1
Clear CMOS (JP9)
If you encounter an abnormal condition that causes PXI-3950
to halt or fail to boot, clear the CMOS and restore the controller
BIOS to its default settings. To clear the CMOS, locate the JP9
jumper on the board and short pin#2 and pin#3. After you have
cleared the COMS, restore the jumper by returning to normal
mode (short pin#1 and pin#2).
Figure 2-16: JP9 (Clear CMOS) Settings
Advertising