ADLINK PXI-3950 - Manual (Page 54)

40 Getting Started
PXI-3950
User’s Manual
Boot from on-board CF card
X Make sure the bootable CF is firmly installed in the CF
socket.
X Power on the PXI-3950 and enter BIOS to modify the set-
ting of boot device as following:
Z [Boot] » [Hard Disk Drives] » [1st Drive]
Z [Boot] » [1st Boot Device] » [HDD:XX]
X Save the change
X Reboot the system
NOTE: NOTE:
If there is a hard drive installed, you will see 1st Drive
and 2nd Drive shown. Please recognize the bootable CF
according the model name comes after the xth Drive on
the screen and set it to 1st Drive.
NOTE: NOTE:
“HDD:XX” refers to the model name selected in last step.