ADLINK PXI-3950 - Manual (Page 58)

44 Getting Started
PXI-3950
User’s Manual
Boot from USB floppy drive
X Connect the USB floppy drive via a USB port on the face-
plate.
X Put a bootable disk in the USB floppy drive.
X Power on the PXI-3950 and enter BIOS to modify the set-
ting of boot device as following:
Z [Boot] » [USB Drives] » [1st Drive]
Z [Boot] » [1st Boot Device] » [USB:XX]
X Save the change
X Reboot the system
NOTE: NOTE:
If there are multiple USB external devices installed, you
will see 1st Drive, 2nd Drive and etc. Please recognize
the USB floppy drive according the model name comes
after the xth Drive on the screen and set it to 1st Drive.
NOTE: NOTE:
“USB:XX” refers to the model name selected in last step.