ADLINK PCIe-9529 - Manual (Page 26)

16 Getting Started
Inspect the carton and packaging for damage. Shipping and han-
dling could cause damage to the equipment inside. Make sure that
the equipment and its associated components have no damage
before installation.
2.3 Installing the Module
1. Turn off the computer.
2. Remove the top cover.
3. Select an available PCI express x4 slot and remove the
bracket-retaining screw and the bracket cover.
4. Line up the PCI express digitizer with the PCI express
slot on the back panel. Slowly push down on the top of
the PCI express digitizer until its card-edge connector is
resting on the slot receptacle.
5. Install the bracket-retaining screw to secure the PCI
express digitizer to the back panel rail.
6. Replace the computer cover.
CAUTION:
The equipment must be protected from static discharge and
physical shock. Never remove any of the socketed parts
except at a static-free workstation. Use the anti-static bag
shipped with the product to handle the equipment and wear a
grounded wrist strap when servicing.
WARNING:
Do not install or apply power to equipment that is damaged or
missing components. Retain the shipping carton and packing
materials for inspection. Please contact your ADLINK
dealer/vendor immediately for assistance and obtain authoriza-
tion before returning any product.