ADLINK EOS-4000 - Manual (Page 22)

10 Introduction
Table 1-6: DVI-I Connector Signals
1.5.7 USB 2.0 Connectors
The EOS-4000 provides four Type A USB 2.0 ports on the front
panel. All are compatible with Hi-Speed, full-speed, and low-speed
USB devices.
The EOS-4000 supports multiple boot devices, including USB
flash, USB external HD, USB floppy, and USB CD-ROM drives.
Boot priority and device can be configured in BIOS. Please refer to
Section A.2.8 USB Configuration for details.
1.5.8 USB 3.0 Connectors
The EOS-4000 provides two Type A USB 3.0 ports on the front
panel. Based on the TI TUSB7320RKM USB host controller, con-
nection to the host system is achieved through a PCIe x1 Gen2
PIN Signal PIN Signal PIN Signal PIN Signal
1 DVIdata 2- 9 DVIdata 1- 17 DVIdata 0- C1
Analog
Red
2 DVIdata 2+ 10 DVIdata 1+ 18 DVIdata 0+ C2
Analog
Green
3 GND 11 GND 19 GND C3
Analog
Blue
4 CRT DDC clock 12 N/C 20 N/C C4
Analog
horiz.
sync
5 CRT DDC data 13 N/C 21 N/C C5
Analog
GND
6 DVIDC clock 14 +5V 22 GND
7 DVIDC data 15 GND 23 DVI clock +
8
Analog vert.
sync
16
Hot plug
detect
24 DVI clock -