ADLINK EOS-4000 - Manual (Page 29)

Introduction 17
EOS-4000
1.6.3 Trigger Input/Strobe Output Connector
The EOS-4000 features a 2-CH trigger input and strobe output on
the rear panel, based on an onboard digital I/O card supporting
features as follows.
Table 1-11: Trigger Input/Strobe Output Specifications
Figure 1-13: Trigger Input/Strobe Output Connector
Line/Area Trigger Input
Item Min. Max. Test Conditions
Input high threshold +2.0V +5.5V
Ambient temperature: 25°C Input low threshold 0V +0.8V
Input signal frequency N/A 2MHz
Strobe Output
Item Min. Max. Test Conditions
High output voltage +3.8V +5V
Typical output current: +/- 24mA
Low output voltage 0V +0.4V
1
8
9
15