ADLINK EOS-4000 - Manual (Page 52)

40 Getting Started
1. Close any running applications
2. Execute Network.exe and follow onscreen instructions
3. Reboot the system
2.7.4 USB 3.0 Driver Installation
Please follow the following steps to install the Texas Instruments
USB 3.0 driver:
1. Close any running applications
2. Execute Texas Instruments xHCI Driver v1.12.25 (
WHQL - Multilanguage ).exe in the USB3 folder and fol-
low the onscreen instructions to complete the setup
3. Reboot the system
2.7.5 ME (Management Engine Components) Software
Installation
The Intel
®
Management Engine software components requiring
installation depend on the system's specific hardware and firm-
ware features.
The installer detects system capabilities and installs the relevant
drivers and applications.
To install the ME Software:
1. Close any running applications
2. Execute Setup.exe in the ME_SW folder and follow the
onscreen instructions
2.7.6 Frame Grabber And Digital Input/Output Driver
Installation
To install the drivers for ADLINK frame grabber and DI/O:
1. Close any running applications.