ADLINK EOS-4000 - Manual (Page 50)

38 Getting Started
Windows 7 Embedded Service Pack 1
Windows Embedded Standard 7 SP1 delivers the power, famil-
iarity, and reliability of the Windows 7 operating system in a
componentized form, allowing developers to create advanced
commercial and consumer devices compatible with thousands
of existing Windows applications and drivers.
You can download the evaluation version from: http://
www.microsoft.com/download/en/details.aspx?id=11887
The download contains 3 DVD5 images (ISO's). Download the
.exe and .rar files for each DVD image into its own folder and
run the .exe file in that folder to reconstitute the .ISO file. Once
the .ISO file is created you can then burn the ISO onto a blank
DVD. The toolkit DVD is used to install the Image Configuration
Editor (ICE) and associated distribution share(s) onto a PC.
The 32-bit and 64-bit Standard 7 SP1 DVDs are bootable
WinPE DVDs that contain the Image Builder Wizard (IBW) and
the corresponding 32-bit or 64-bit distribution share. Typically
these DVDs are used to boot into Windows PE on the target
device and apply the runtime image created with ICE or to pro-
totype image creation using the wizard and various templates
available in IBW.
Please read the Windows Embedded Standard 7 SP1 docu-
mentation for more information on using ICE and IBW to create
and deploy runtime images.
2.7 Driver Installation
After the OS is installed, all related drivers must be installed. This
section describes drivers needed for Windows operating systems
and installation procedures. For other OS support, please contact
ADLINK directly.
Once Windows is properly installed, the following installations are
required (most standard I/O device drivers have been included in
the Windows install):
1. Install the chipset driver
2. Install the graphics driver
3. Install the Ethernet driver