ADLINK HSL-AI16AO2-M-VV/-AV - Manual (Page 110)

HSL Function Library 97
*in_data: The input data of slave modules.
X
For HSL_D_read_input: The data of channel 0 is
assigned to bit 0, the data of channel 1 is assigned to bit 1,
and so on.
X
For HSL_D_read_channel_input: The value is the digi-
tal input data of the specified channel.
X
oFor HSL_D_all_slave_index: An unsigned short array
pointer. You must create an unsigned short array containing
63 cells. The cell index corresponds to the slave index. For
example, cell index 0 corresponds to the module with slave
index 1. The cell index 2 corresponds to the module with
slave index 2, and so on. The last cell index 62 corresponds
to the module with slave index 63.
channel: Specifies the channel of the discrete I/O module that
wants to perform this function. The valid values are enumerated
below.
X HSL-R8DI16: 0 to 15
X HSL-DI16DO16: 0 to 15
X HSL-DI32: 0 to 31
X HSL-DO32: 0 to 31
*out_data_in_ram: The output data stored in RAM. The data of
channel 0 is assigned to bit 0; the data of channel 1 is assigned to
bit 1 and so on.
input_logic: Sets the input logic to the specified module.
output_logic: Sets the output logic to the specified module.
Type: Types of hardward interrupt occurrence timing value (1 to
3).
bitsOfCheck: Renews data bits (16 bits).
Cell index of array
(Unsigned short)
Corresponding
slave index
0 1
1 2
…... ……
62 63