ADLINK HSL-AI16AO2-M-VV/-AV - Manual (Page 97)

84 HSL Function Library
connect_index: For PCI-7851, the valid value is 0. For PCI-
7852 and PMC-7852/G, the valid value is 0 or 1.
max_slave_No: The maximum slave index connected to the HSL
master card with the connect_index. The valid value is from 1 to
63.
slave_No: Specifiy the slave module with slave index which want
to perform this function. The valid value is from 1 to 63.
comm_type: Half or Full duplex
0: Half duplex
1: Full duplex
transfer_rate: transfer rate setting
1: 3M
2: 6M
3: 12M
hub_number: cascaded Hub number. If no Hub in the system, the
value of hub_number is set to 0.
*sts_data: The communication status of this slave module. The
definition is as follows.
X Bit 0 is Data_Req bit.
X Bit 2 is for CHK1. (If Bit2 is 1. It means that there is 1 time
communication error).
X
Bit 3 is for CHK3. (If Bit3 is 1. It means that there are 3 times
communication errors).
X
Bit 4, BIT 5 and BIT 6 bits are for CHK7. (If Bit4, Bit5 and
Bit6 all are 1. It means that there are 7 times communication
errors).
*live_data: The module status.
X
1: the module is live
X
0: the module is die.
irq_no: IRQ occupied by master card.