ADLINK aTCA-9300 - Manual (Page 5)

5
1 Overview
1.1 Introduction
The ADLINK aTCA-9300 is a high performance AdvancedTCA® (ATCA) processor blade
featuring dual 4-core Intel® Xeon® processor E3 1275V2 /1225V2, Intel® C216 Chipset, four
channel memory up to 32 GB of DDR3 memory and 300 W power supply subsystem. Versatile
connectivity includes dual 10GbE Fabric Interfaces, dual GbE Base Interfaces, quad front
panel GbE egress ports, front panel dual COM and USB 2.0 ports and front panel VGA
connector. An onboard SATA connector supports CFast up to 32 GB and the optional RTM
(aTCA-R6270/R6280) supports an 8-channel mini-SAS port, dual 10GbE SFP+ ports, dual
USB ports and dual hot-swappable SATA bays providing additional network throughput and
storage capacities.
The aTCA-9300's thermal solution (including VRM heat sink) ensures stable operation under
extreme operating environments and allows for compliance to the NEBS Level 3 standard
(design only). The robust computing power and reliability of the aTCA-9300 meets the
requirements of telecom equipment manufacturers (TEMs) and network equipment providers
(NEPs), allowing them to build the next-generation telecom networks and communication
infrastructures.
Detailed features are outlined below and a functional block diagram is shown in the next
section.
„
Single Four-core Intel® Xeon® processor Xeon E3 1275V2/1225V2 or Core i3 3220
„ Server-class Intel® C216 Chipset
„ DDR3-1600 JEDEC standard VLP UDIMM (ECC), up to 32 GB
„ Onboard bootable 16GB SATA Interface CFast card (max. 32GB)
„ Six Intel® I210 Gigabit Ethernet controllers
„ One Intel® 82599EB 10Gigabit Ethernet (XAUI) controller
„ Optional Intel® 82599ES 10Gigabit Ethernet (SFP+) controller on RTM (aTCA-R6270)
„ Optional dual SATA interface drive bays on RTM (aTCA-R6270)
„ Optinal Dual 4 channel of mini SAS for external storage device(aTCA-RTM6280)
„ Dual PICMG 3.1 Option 9 Fabric Interface channels
„ Failover system BIOS
„ Analog VGA output up to 1920x1440 resolution