7 network stack, Network stack – ADLINK aTCA-9300 User Manual

Page 62

Advertising
background image

62

Terminal Type

VT-UTF8 is the preferred terminal type for out-of-band management. The next best

choice is VT100+ and then VT100. See above, in Console Redirection Settings page, for
more Help with Terminal Type/Emulation. Configuration options: VT100, VT100+, VT-
UTF8 , ASNI.

Bits per second

Select the bits per second you want the serial port to use for console redirection. The

options are 115200 ,57600 ,38400, 19200, 9600.

Flow Control

Set this option to select Flow Control for console redirection. The settings for this value

are None and Hardware RTS/CTS.

Data Bits

This is a display-only function providing information about the frame width for the Out-of-Band

Management.

Parity

This is a display-only function providing information about the parity for Out-of-Band Management.

Stop Bits

This is a display-only function providing information about the number of stop bits for Out-of-Band

Management.

6.3.7 Network

Stack

You can use this screen to specify options for the Network Stack settings.
The screen is shown as below.


Advertising