ADLINK aTCA-9300 - Manual (Page 67)

67
6.5 Boot Setup
Select the Boot tab from the setup screen to enter the Boot BIOS Setup screen.
You can select any of the items in the left frame of the screen, such as Boot Device
Priority, to go to the sub menu for that item. You can display an Boot BIOS Setup
option by highlighting it using the < Arrow > keys. The Boot Settings screen is
shown below:
Quiet Boot
Disabled - Set this value to allow the computer system to display the POST
messages.
Enabled - Set this value to allow the computer system to display the OEM logo.
Fast Boot
Enables or disables boot with initialization of a minimal set of devices required to
launch active boot option. Has no effect for BBS boot options. Set this value to
Enable / Disable.
GateA20 Active
Upon Request – GA20 can be disabled by using BIOS services. Always – do not
allow disabling GA20. This option is useful when any RT code is executed above
1MB.