1 introduction, 1 overview, 2 features – ADLINK cPCI-3965 User Manual
Page 15: Chapter 1, introduction, Overview, Features, 1introduction
Introduction
1
cPCI-3965
1
Introduction
1.1
Overview
The cPCI-3965 Series is a 3U CompactPCI single board computer
in single slot (4HP) or dual slot (8HP) width form factor featuring
the Mobile Intel® GME965 Express chipset and low power
Core™2 Duo or Celeron® processor(s) with 800MHz front-side
bus (FSB). The cPCI-3965 provides two SO-DIMM sockets for up
to 4GB of non-ECC memory, VGA + DVI dual display, true IDE
CompactFlash slot, and 2.5” SATA HDD (8HP cPCI-3965D). Front
panel I/O includes 2x USB, 2x GbE, VGA, and additional 2x USB,
COM, KB/MS, and DVI for the 8HP cPCI-3965D model.
The optional Rear Transition Module (RTM) provides 2x SATA,
1x GbE, 2x USB, and 1x COM. Two lanes PCI-Express x1 are
routed to J2 and to the layer 2 board-to-board connector to allow
custom I/O expansion, such as additional LAN port, or graphics
functions. The cPCI-3965 Series is ideally suited for factory auto-
mation, and other industrial applications.
1.2
Features
X
3U CompactPCI SBC in 4HP or 8HP width form factor
X
Single Core™ 2 Duo 2.2GHz processor, 4MB L2 cache
X
Front Side Bus 533/667/800MHz
X
Intel® GME965 Memory Controller Hub and ICH8M I/O Hub
X
Dual Channel DDR2 unbuffered non-ECC SDRAM at 667MHz
X
Two stacked SO-DIMM sockets for maximum 4GB memory
X
32bit/33MHz CompactPCI Interface based on PCI specifica-
tions
X
One analog VGA and one digital DVI port on front panel
(DVI on 8HP only)
X
Two PCI-Express® Gigabit Ethernet egress ports, one port can
be configured to RTM by software
X
One EIDE CompactFlash socket
X
2.5” SATA HDD onboard on 8HP SBC and two 7-pin SATA
ports on RTM