7 chipset setup, Usb functions, Usb 2.0 controller – ADLINK cPCI-3965 User Manual
Page 85: Lan1 output select, Onboard lan bios init, Chipset setup
BIOS Setup
71
cPCI-3965
8.7
Chipset Setup
Select the Chipset tab from the setup screen to enter the Chipset
BIOS Setup screen. You can select any of the items in the left
frame of the screen to go to the sub menu for that item. The
Chipset BIOS Setup screen is shown below.
USB Functions
Set this value to allow the system to disable, enable, and select a
set number of onboard USB ports.
USB 2.0 Controller
This option takes effect only when USB Functions are enabled.
Enabling will allow USB 2.0 functionality to all USB ports.
LAN1 Output Select
Set the LAN1 output to Front or Rear.
Onboard LAN BIOS Init
Set this value to enable/disable the invoking of onboard LAN’s
PXE ROM. Disabling can shorten the POST time by not initializing
LAN PXE ROM. Enable it if boot from LAN is needed.