ADLINK cPCI-6615 - Manual (Page 55)

Getting Started 41
cPCI-6615
5.4 2.5" SATA Drive Installation
The cPCI-6615 provides space to install a slim type 2.5” SATA drive.
1. Locate the DB-6920SAT kit in the package (includes
daughter board, 2 standoffs, drive bracket, 6 screws).
Locate the onboard SATA connector (CNX3) as shown
below. Remove the PMC keying pin indicated below.
2. Secure the DB-6920SAT daughter board to the onboard
SATA connector CNX3 with two screws provided.
Keying pin