ADLINK cPCI-6615 - Manual (Page 92)

78 BIOS Setup
8.7 Chipset Setup
Select the Chipset tab from the setup screen to enter the Chipset
BIOS Setup screen. You can select any of the items in the left
frame of the screen to go to the sub menu for that item. The Chip-
set BIOS Setup screen is shown below.
HDA Controller
Set this value to Enable/Disable the HD Audio Controller.
Onboard LAN BIOS Init
Set this value to enable/disable the invoking of onboard LAN’s
PXE ROM. Disabling can shorten the POST time by not initializing
LAN PXE ROM. Enable it if boot from LAN is needed.
Onboard LAN1/2 Output Select
Set the Onboard LAN1/2 output to Front or Rear.
Initial Graphics Adapter
Select which graphics controller to use as the primary boot device.