ADLINK cPCIS-ET2600 Series - Manual (Page 16)

10
•
Backplane
3 Backplane
In this chapter, we will describe the backplane for the cPCIS-ET2600 Series
subsystems. The following table specifies the backplane(s) that correspond
to each model.
backplane slots
power
backplane
cPCIS-ET2632[R] cBP-3208[R] 8 cBP-3062A
3.1 cBP-3208[R] Backplane
The cBP-3208[R] is a 3U CompactPCI 32-bit backplane with optional rear I/O
(designated by an “R” suffix). It is used by the cPCIS-2630 / 2631 / 2632 /
2650 / 2651[R].
Specifications
•
Standard CompactPCI height for 3U cPCI cards
• CompactPCI
Compliancy
o PICMG 2.0 CompactPCI core specification R3.0
o PICMG 2.1 CompactPCI hot swap R2.0
•
Dimensions: 141.3 x 128.7 mm
•
PCI bus clock: up to 32-bit/33MHz
•
System Slot: one R-hand side dual-slot
•
System Slot Rear I/O: P2 rear I/O with AB-type shroud
•
Peripheral slots: 7
•
Peripheral Slots Rear I/O: P2 rear I/O with AB-type shroud (optional)
•
Power Connectors: ATX connector x2, DC screw terminals
•
V (I/O): 3.3V or 5V selectable, default 5V
•
Other connectors: INH#, Reset, PWR_FAL#