ADLINK cPCIS-ET2600 Series - Manual (Page 37)

Cooling System
• 31
4 Cooling System
The cPCIS-ET2600 Series subsystems with CompactPCI PSUs are
equipped five front-access hot swappable low noise fans on the bottom of the
chassis to provide an effectively cooled environment. The fans are push-in
and ventilate out the rear of the chassis. The chassis is equipped with air
filters that are removable for cleaning and replacement. An embedded alarm
board monitors fan status and initiates a visible and audible alarm upon fan
failure.
4.1 Removing and Replacing the Air Filters
cPCIS-ET2600 Series models with CompactPCI PSU(s)
To ensure proper performance, the air filters of cPCIS-ET2600 Series
subsystems with CompactPCI PSUs should be cleaned or replaced as
necessary. Replacement air filters are supplied and can be found in the
Accessory Packet.
Air Filter Removal and Replacement Procedure
1. Remove the screws attaching the front filter cover at the base of the
chassis (2 screws) and remove the cover.