ADLINK Express-HLE - Manual (Page 53)

Express-HLE Page 53
7.2.4.3 System Management > Power Consumption
Feature Options Description
Power Consumption Info only
Current Input Current Read only Display input current.
Current Input Power Read only Display input power.
AIN0 Read only Display actual voltage of the AIN0.
V3.30 Read only Display actual voltage of the V3.30.
V1.05 Read only Display actual voltage of the V1.05.
Vtt Read only Display actual voltage of the VTT.
V1.35 Read only Display actual voltage of the V1.35.
V5.00 Read only Display actual voltage of the V5.00.
V3.30 Read only Display actual voltage of the V3.30.
AIN7 Read only Display actual voltage of the AIN7.
7.2.4.4 System Management > Runtime Statistics
Feature Options Description
Runtime Statistics Info only
Total Runtime Read only The returned value specifies the total time in minutes the system
is running in S0 state.
Current Runtime Read only The returned value specifies the time in seconds the system is
running in S0 state.
This counter is cleared when the system is removed from the
external power supply.
Power Cycles Read only The returned value specifies the number of times the external
power supply has been shut down
Boot Cycles Read only The Bootcounter is increased after a HW- or SW-Reset or after a
successful power-up.
Boot Reason Read only The boot reason is the event which causes the reboot of the
system.
7.2.4.5 System Management > Flags
Feature Options Description
Flags Info only
BMC Flags Read only
BIOS Select Read only Display the selection of current BIOS ROM.
ATX/AT-Mode Read only Display ATX/AT-Mode.
Exception Code Read only System exception reason.