ADLINK Express-HLE - Manual (Page 62)

Page 62 Express-HLE
7.3.5.1 USB > PCH USB Configuration
Feature Options Description
USB Precondition Disabled
Enabled Precondition work on USB host controller and root ports for
faster enumeration.
XHCI Mode Disabled
Enabled Mode of operation of xHCI controller.
BTCG Disabled
Enable
Enable/Disable trunk clock gating.
USB Precondition Disabled
Enabled Precondition work on USB host controller and root ports for
faster enumeration.
USB Port #0~13 Disabled
Enabled Control each of the USB ports (0~13) disabling.
USB30 Port #0~5 Disabled
Enabled Enable or Disable USB 3.0 Port.
7.3.6 Network
Feature Options Description
Network Stack Info only
Network Stack Enabled
Disabled Enable/Disable UEFI network stack.
PCH LAN Controller Enabled
Disabled Enable/Disable onboard NIC.
Wake on LAN Enabled
Disabled Enable/Disable integrated LAN to wake the system. (The Wake On
LAN cannot be disabled if ME is on at Sx state.
AMT Configuration Info only
Intel AMT Enabled
Disabled Enable/Disable Intel (R) Active Management Technology BIOS
Extension.
BIOS Hotkey Pressed Enabled
Disabled Enable/Disable BIOS hotkey press.
MEBx Selection Screen Enabled
Disabled Enable/Disable MEBx selection screen.
Hide Un-Configure ME Confirmation Enabled
Disabled Hide Un-Configure ME without password Confirmation Prompt.
MEBx Debug Message Output Enabled
Disabled Enable MEBx debug message output.
Un-Configure ME Enabled
Disabled Un-Configure ME without password.
Amt Wait Timer 0 Set timer to wait before sending ASF_GET_BOOT_OPTIONS.
Disable ME Enabled
Disabled Set ME to Soft Temporary Disabled.
ASF Enabled
Disabled Enable/Disable Alert Specification Format.
Activate Remote Assistance Process Enabled
Disabled Trigger CIRA boot.
USB Configure Enabled
Disabled Enable/Disable USB Configure function.