ADLINK Express-HLE - Manual (Page 58)

Page 58 Express-HLE
7.3.3 Graphics
Feature Options Description
Graphics Configuration Info only
IGFX VBIOS Version Info only Display VBIOS Version.
IGfx Frequency Info only Display IGfx Frequency.
Graphics Turbo IMON Current Number entry field Graphics turbo IMON current values supported (14-31).
Primary Display Auto
IGFX
PEG
PCIE Select which of IGFX/PEG/PCI Graphics device should be Primary
Display Or select SG for Switchable Gfx.
Primary PEG Auto
PEG1
PEG2 Select PEG0/PEG1/PEG2/PEG3 Graphics device should be Primary
PEG.
Primary PCIE Auto
PCIE1
PCIE2
PCIE3
PCIE4
PCIE5
PCIE6
PCIE7 Select PCIE0/PCIE1/PCIE2/PCIE3/PCIE4/PCIE5/PCIE6/PCIE7
Graphics device should be Primary PCIE.
Internal Graphics Auto
Disabled
Enable Keep IGD enabled based on the setup options.
Aperture Size 128MB
256MB
512MB Select the Aperture Size.
DVMT Pre-Allocated XXM Select DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used
by the Internal Graphics Device.
DVMT Total Gfx Mem XXXM Select DVMT5.0 Total Graphic Memory size used by the Internal
Graphics Device.
Gfx Low Power Mode Enabled
Disabled This option is applicable for SFF only.
LVDS Backlight Mode BMC Mode
GTT Mode Select LVDS Backlight control function.
GTT LVDS Backlight Control 0%
20%
40%
60%
80%
100% Actual backlight value in percent of the maximum setting.
DDI function choose Display Port
HDMI Select DDI function choose to display port or HDMI.
Primary IGFX Boot Display CRT Select the Video Device which will be activated during POS.
Secondary IGFX Boot Display Disabled Select Secondary Display Device.