ADLINK Express-HLE - Manual (Page 66)

Page 66 Express-HLE
Feature Options Description
CER Disabled
Enable Enable/Disable PCI Express Device Correctable Error
Reporting.
CTO Disabled
Enable Enable/Disable PCI Express Completion Timer TO.
SEFE Disabled
Enable Enable/Disable Root PCI Express System Error on Fatal
Error.
SENFE Disabled
Enable Enable/Disable Root PCI Express System Error on Non-
Fatal Error.
SECE Disabled
Enable Enable/Disable Root PCI Express System Error on
Correctable Error.
PME SCI Disabled
Enable Enable/Disable PCI Express PME SCI.
Hot Plug Disabled
Enable Enable/Disable PCI Express Hot Plug.
PCIe Speed Auto
Gen1
Gen2 Select PCI Express port speed.
Detect Non-Compiance Disabled
Enable Detect Non-Compliance PCI Express Device. If enabled, it
will take more time at POST time.
Extra Bus Reserved 0 Extra Bus Reserved (0-7) for bridges behind this Root
Bridge.
Reseved Memory 10 Reserved Memory Range for this Root Bridge.
Prefetchable Memory 10 Prefetchable Memory Range for this Root Bridge.
Reserved I/O 4 Reserved I/O (4K/8K/12K/16K/.../48K) Range for this Root
Bridge.
PCIE LTR Disabled
Enable PCIE Latency Reporting Enable/Disable.
PCIE LTR Lock Disabled
Enable PCIE LTR Configuration Lock.
Snoop Latency Ocerrid Disabled
Manual
Auto Snoop Latency Ocerride for PCH PCIE.
Non Snoop Latency Ocerrid Disabled
Manual
Auto Non Snoop Latency Ocerride for PCH PCIE.
7.3.8 Super IO
Feature Options Description
Super IO Chip Info only
W83627DHG Super IO Configuration Info only
Serial Port 1 Configuration
Serial
Port
Device
Settings
Enabled
Disabled
IO=3F8h; IRQ=4
Enable/Disable Serial Port (COM).
Fixed configuration of serial port.