ADLINK Express-HLE - Manual (Page 57)

Express-HLE Page 57
Feature Options Description
CPU C3 Report Disabled
Enabled Enable/Disable CPU C3 report to OS.
CPU C6 Report Disabled
Enabled Enable/Disable CPU C6 report to OS.
CPU C7 Report Disabled
CPU C7
CPU C7S Enable/Disable CPU C7 report to OS.
ACPI T State Disabled
Enabled Enable/Disable ACPI T state support.
CPU DTS Disabled
Enabled Enable/Disable CPU DTS.
7.3.2 Memory
Feature Options Description
Memory RC Version Info only Display Memory Reference Code Version.
Memory Frequency Info only Display Memory Frequency.
Total Memory Info only Display Total Memory.
Memory Voltage Info only Display Memory Voltage.
DIMM#0/1 Info only Display DIMM#0/1.
CAS Latency (tCL) Info only Display CAS Latency (tCL).
Minimum delay time Info only Display Minimum delay time.
CAS to RAS (tRCDmin) Info only Display CAS to RAS (tRCDmin).
Row Precharge (tRPmin) Info only Display Row Precharge (tRPmin).
Active to Precharge (tRASmin) Info only Display Active to Precharge (tRASmin).
XMP Profile 1 Info only Display XMP Profile 1 support or not.
XMP Profile 2 Info only Display XMP Profile 2 support or not.
SPD Write Protect Enabled
Disabled Enable:Writes to SMBus slave addresses A0h - AEh are disabled.
Memory Frequency Limiter Auto Maximum Memory Frequency Selections in Mhz.
Max TOLUD Dynamic Maximum Value of TOLUD. Dynamic assignment would adjust
TOLUD automatically based on largest MMIO length of installed
graphic controller.
MRC Fast Boot Enabled
Disabled Enable/Disable MRC fast boot.
Memory Remap Enabled
Disabled Enable/Disable e memory remap above 4G.
Channel A DIMM Control Enabled
Disabled Enable/Disable DIMMs on channel A.
Channel B DIMM Control Enabled
Disabled Enable/Disable DIMMs on channel B.
Memory Thermal Management Enabled
Disabled Enable/Disable Memory Thermal Management.