ADLINK Express-HRR - Manual (Page 40)

Chapter 4 BIOS Setup
36 Reference Manual Express-HRR
• Legacy OpROM Support
♦ Launch PXE OpROM [Disabled; Enabled]
♦ Launch Storage OpROM [Disabled; Enabled]
• ACPI Settings
♦ ACPI Sleep State [Suspend Disabled; S1 (CPU Stop Clock); S3 (Suspend to RAM)]
♦ Emulation AT/ATX [Emulation AT; ATX]
• Trusted Computing
♦ TPM SUPPORT [Disabled; Enabled]
♦ Current TPM Status Information [depends on board model]
• RTC Wake Settings
♦ RTC Wake Function [Enabled; Disabled]
• CPU Configuration
♦ Intel(R) Core(TM) i7 CPU @ X.XXGHz
♦ Processor ID XXXxX
♦ Microcode Revision 15
♦ Max Processor Speed XXXXMHz
♦ Min Processor Speed XXXMHz
♦ Processor Speed XXXX MHz
♦ Processor Cores X
♦ Intel HT Technology Supported
♦ EMT64 Supported
♦ Hyper-Threading [Disabled; Enabled]
♦ Limit CPUID Maximum [Disabled; Enabled]
♦ Execute Disable Bit [Disabled; Enabled]
♦ Hardware Prefetcher [Disabled; Enabled]
♦ Adjacent Cache Line Prefetch [Disabled; Enabled]
♦ Intel Virtualization [Disabled; Enabled]
• SATA Configuration
♦ SATA Controller(s) [Disabled; Enabled]
♦ SATA Mode Selection [IDE; AHCI; RAID]
♦ Serial ATA Port 0 XXXXXXXXXX (XXX.X)
• Software Preserve Supported
♦ Serial ATA Port 1 Empty
• Software Preserve Unknown
♦ Serial ATA Port 2 Empty
• Software Preserve Unknown
♦ Serial ATA Port 3 Empty
• Software Preserve Unknown