ADLINK Express-HRR - Manual (Page 5)

Express-HRR Reference Manual 1
Chapter 1 About This Manual
Purpose of this Manual
This manual is for designers of systems based on the Express-HRR Computer-on-Module (COM). This
manual contains information that permits designers to create an embedded system based on specific design
requirements.
Information provided in this reference manual includes:
• Product Overview
• Hardware Specifications
• BIOS Setup Information
• Technical Support Information
Information not provided in this reference manual includes:
• Detailed chip specifications (refer to References section of this chapter for hyperlinks to chip
specifications)
• Internal component operation
• Internal registers or signal operations
• Bus or signal timing for industry standard busses and signals
• Pin-signal definitions for industry-standard interfaces
References
The following list of references may be helpful for you to complete your custom design successfully.
Specifications
• COM Express Specification Revision 2.0
Web site: http://www.picmg.org/
• PCIe Specification Revision 2.0
Web site: http://www.pcisig.com/specifications/pciexpress/base
• I 2 C Bus Specification Version 2.1
Specification: http://www.nxp.com/documents/other/39340011.pdf
• USB Specification Version 2.0
Web site: http://www.usb.org/developers
• SATA Specification Version 3.1
Web site: http://www.sata-io.org/
• LPC Specification Version 1.1
Web site: http://www.intel.com/design/chipsets/industry/lpc.htm
• SMBus Specification Version 2.0
Specification: http://smbus.org/specs/
• ADLINK Intelligent Device Interface (AIDI) Library User’s Manual (See Utilities section of Product
page)
Web site: http://www.adlinktech.com/Computer-on-Module/Com-Express/index.html