ADLINK cExpress-BT - Manual (Page 56)

Page 56 cExpress-BT
Feature Options Description
Unpopulated Links Keep Link ON
Disabled In order to save power, software will disable unpopulated PCI
Express links if this option set to Disabled.
Restore PCIE Registers Enabled
Disabled On non-PCI Express aware OSes (pre Windows Vista) some
devices may not be correctly reinitialized after S3. Enabling this
restores PCI Express device configurations on S3 resume.
Warning: Enabling this may cause issues with other hardware after
S3 resume.
PCIe Configuration Info only
PCIe Configuration Submenu
7.3.7.1. PCI and PCIe > PCIe Configuration
Feature Options Description
PCIe Configuration Info only
PCI Express Root Port x Submenu
7.3.7.2. PCI and PCIe > PCIe Configuration > PCI Express Port x
Feature Options Description
PCI Express Port x Enabled
Disabled Enable or disable the PCI Express port x in the chipset.
ASPM Auto PCI Express Active State Power Management settings.
URR Disabled
Enabled Enable or disable PCI Express Unsupported Request Reporting.
FER Disabled
Enabled Enable or disable PCI Express Device Fatal Error Reporting.
NFER Disabled
Enabled Enable or disable PCI Express Device Non-Fatal Error
Reporting.
CER Disabled
Enabled Enable or disable PCI Express Device Correctable Error
Reporting.
SEFE Disabled
Enabled Enable or disable Root PCI Express System Error on Fatal
Error.
SENFE Disabled
Enabled Enable or disable Root PCI Express System Error on Non-Fatal
Error.
SECE Disabled
Enabled Enable or disable Root PCI Express System Error on
Correctable Error.
PME SCI Disabled
Enabled Enable or disable PCI Express PME SCI.
Hot Plug Disabled
Enabled Enable or disable PCI Express hotplug.
Speed Auto
Gen 2
Gen 1
Configure PCIe port speed.