ADLINK cExpress-BT - Manual (Page 8)

Page 8 cExpress-BT
1. Introduction
The cExpress-BT is a COM Express® COM.0 R2.1 Type 6 module supporting the Intel® Atom™ processor E3800 Series and Intel®
Celeron® processor system-on-chip (SoC). The cExpress-BT is specifically designed for customers who need high-level processing and
graphics performance with low power consumption in a long product life solution.
The Intel® Atom™ processor E3800 and Intel® Celeron® processor support non-ECC type DDR3L dual-channel memory at 1066/1333 MHz
to provide excellent overall performance. Integrated Intel® Gen7 HD Graphics includes features such as OpenGL 3.1, DirectX 11, OpenCL
1.1 and support for H.264, MPEG2, VC1, VP8 hardware decode. Graphics outputs include VGA, DDI ports supporting HDMI/DVI/DisplayPort
and optional dual-channel 18/24-bit LVDS. The cExpress-BT is specifically designed for customers with high-performance processing
graphics requirements who want to outsource the custom core logic of their systems for reduced development time.
The cExpress-BT has dual stacked SODIMM sockets for up to 8 GB non-ECC type DDR3L memory. In addition, an onboard miniSD card
slot and onboard eMCC memory (optional, 8GB to 64GB) are supported.
The cExpress-BT features a single Gigabit Ethernet port, USB 3.0 ports and USB 2.0 ports, and SATA 3 Gb/s ports. Support is provided for
SMBus and I 2 C. The module is equipped with SPI AMI EFI BIOS, supporting embedded features such as remote console, CMOS backup,
hardware monitor, and watchdog timer.