ADLINK cExpress-BT - Manual (Page 59)

cExpress-BT Page 59
Feature Options Description
Mark
Space
Stop Bits 1
2 Select number of stop bits.
Flow Control None
Hardware RTS/CTS Select flow control.
VT-UTF8 Combo Key Support Disabled
Enable Enable VT-UTF8 combination key support for ANSI/VT100
terminals.
Recorder Mode Disabled
Enable With this mode enabled only text will be sent. This is to capture
terminal data.
Resolution 100x31 Disabled
Enable Enables or disables extended terminal resolution
Legacy OS Redirection 80x24
80x25 On legacy OSes, the number of rows and columns supported by
redirection
Putty KeyPad VT100
LINUX
XTERMR6
SCO
ESCN
VT400 Select FunctionKey and KeyPad on Putty.
Redirection After BIOS Post Always Enabled
BootLoader The Settings specify if BootLoader is selected, then legacy
console redirection is disabled before booting to legacy OS.
Default value is Always Enable which means legacy console
redirection is enabled for legacy OS.
7.3.12. Thermal
Feature Options Description
Thermal Info only
CPU Temperature Info only
Critical Trip Point Disabled
85 C
95 C This value controls the temperature of the ACPI Critical Trip Point -
the point at which the OS will shut the system down.
Active Cooling Trip Point Disabled
40 C
50 C
60 C
70 C
BMC Default Active Cooling Trip Point.
Passive Trip Point Disabled
90 C
80 C This value controls the temperature of the ACPI Passive Trip Point -
the point at which the OS will begin throtting the processor.
Passive TC1 Value 1 This value sets the TC1 value for the ACPI Passive Cooling
Formula. Range 1 - 16
Passive TC2 Value 5 This value value sets the TC2 value for the ACPI Passive Cooling
Formula. Range 1 - 16
Passive TSP Value 10 This item sets the TSP value for the ACPI Passive Cooling Formula.
It represents in tenths of a second how often the OS will read the
temperature when passive cooling is enabled. Range 2 - 32