4 sata configuration sata mode, Serial-ata controller, Jmicron sata to pata – ADLINK Express-CB User Manual
Page 47
Page 47
Express-IA533 User’s Manual
Page 47
Express-IA533 User’s Manual
Express-CB User’s Manual
Page 47
Page 47
Express-CB User’s Manual
8.3.4 SATA Configuration
SATA Mode
The SATA can be configured as a legacy IDE, RAID and AHCI mode.
Serial-ATA Controller
This item specifies whether SATA Controller 0 is initialized in Compatible or Enhanced mode
of operation. The settings are Disabled, Compatible and Enhanced.
Serial-ATA Controller
This item specifies whether SATA Controller 1 is initialized in Compatible or Enhanced mode
of operation. The settings are Disabled, Compatible and Enhanced.
Jmicron SATA to PATA
When a PATA device is not connected to the SATA-to-PATA bridge, this option should be set
to No PATA IDE Device Connected to avoid delay due to long detection time.