ADLINK Express-CB - Manual (Page 48)

Express-CB User’s Manual Page 48
8.3.5 Video Function Configuration
You can use this screen to select options for Video Function configuration settings. The
video function BIOS Setup screen is shown below.
DVMT/FIXED Memory
Select DVMT/Fixed memory size used by the Internal Graphics Device. Configuration
options: 128MB, 256MB, Maximum.
IGD – Boot Type
Select the Video Device which will be activated during POST. This has no effect if external
graphics present. Configuration options: VBIOS Default, VGA, LFP, VGA+LFP, TV, LFP-SDVO,
EFP, TV-SDVO, VGA+LFP-SDVO, VGA+EFP, VGA+TV+LFP.
LCD Panel Type
When LVDS is selected from Boot Display Device, this option allows you to select resolution
settings for correct timing to the LVDS interface you want to use. The supported resolutions
are: 640x480 1x18-bit, 800x600 1x18-bit, 1024x768 1x18-bit, 1024x768 2x18-bit,1024x768
1x24-bit, 1024x768 2x24-bit, 1280x600 1x18-bit, 1280x768 1x18-bit,1280x800 1x18-bit,
1280x1024 2x24-bit, 1400x1050 2x24-bit 108MHz, 1400x1050 2x24-bit 122MHz, 1600x1200
2x24-bit, 1920x1200 2x24-bit, 2048x1536 2x24-bit.
Panel Scaling
Select the LCD panel scaling option used by the Internal Graphics Device. Configuration
options: Auto, Force Scaling, Maintain Aspect Ratio, Off.
Active LFP
Select the Active LFP Configuration. Configuration options: NO LVDS, Int-LVDS.
Option Description
No LVDS VBIOS does not enable LVDS
Int-LVDS VBIOS enables LVDS driver by integrated encoder