ADLINK Express-CB - Manual (Page 62)

Express-CB User’s Manual Page 62
Bootup Num-Lock
Set this value to allow the Number Lock setting to be modified during boot up.
Off - This option does not enable the keyboard Number Lock automatically. To use the 10-keys
on the keyboard, press the Number Lock key located on the upper left-hand corner of the 10-key
pad. The Number Lock LED on the keyboard will light up when the Number Lock is engaged.
On - Set this value to allow the Number Lock on the keyboard to be enabled automatically when the
computer system is boot up. This allows the immediate use of 10-keys numeric keypad located on
the right side of the keyboard. To confirm this, the Number Lock LED light on the keyboard will be
lit.
GateA20 Active
Upon Request - GA20 can be disabled using BIOS services. Always - do not allow disabling
of GA20; this option is useful when any RT code is executed above 1MB.
Interrupt 19 Capture
Allows option ROMs to trap Int 19. Set this value to Enabled/Disabled.
Hard Drive BBS Priorities
The boot devices are listed in groups by device type. First press <Enter> to enter the sub-
menu. Then you may use the arrow keys to select the desired device, then press <+>, <-> or
<PageUp>, <PageDown> key to move it up/down in the priority list. Only the first device in
each device group will be available for selection in Boot Option.