7 superio configuration screen, Floppy disk controller configuration – ADLINK Express-CB User Manual
Page 51
Advertising
Page 51
Express-IA533 User’s Manual
Page 51
Express-IA533 User’s Manual
Express-CB User’s Manual
Page 51
Page 51
Express-CB User’s Manual
8.3.7 SuperIO Configuration Screen
The visibility of this SuperIO configuration screen depends on the presence of an onboard
SuperIO (Winbond W83627H). If the Express-CB is used on a carrier w/o a SIO chip, the
legacy-free mode will take effect.
Floppy Disk Controller Configuration
Floppy Disk Controller
Options are Enabled/Disabled.
Change Settings
Select an optimal setting for the Floppy Disk Controller.
Options: Auto; IO=3F0, IRQ6, DMA2
Device Mode
Change Mode of Floppy Disk Controller. Select <Read Write> Mode for Normal operation
Select <Write Protect> mode for Read only operation.
Advertising