ADLINK Express-CB - Manual (Page 53)

Page 53 Express-IA533 User’s Manual Page 53 Express-IA533 User’s Manual Express-CB User’s Manual Page 53 Page 53 Express-CB User’s Manual
Parallel Port
The parallel Port (LPT/LPTE). Options are Enabled/Disabled.
Change Settings
This option specifies the base I/O port address.
Device Mode
This option specifies the parallel port mode. Options: Standard Parallel Port Mode, EPP
Mode, ECP Mode, EPP Mode & ECP Mode.
Option Description
Standard Set this value to allow the standard parallel port mode to be used.
EPP The parallel port can be used with devices that adhere to the Enhanced Parallel Port (EPP)
specification. EPP uses the existing parallel port signals to provide asymmetric bidirectional data
transfer driven by the host device.
ECP The parallel port can be used with devices that adhere to the Extended Capabilities Port (ECP)
specification. ECP uses the DMA protocol to achieve data transfer rates up to 2.5 Megabits per
second. ECP provides symmetric Bidirectional communication.
EPP+ECP Allows the parallel port to support both the ECP and EPP modes simultaneously.
Parallel Port Configuration