ADLINK cExpress-BT2 - Manual (Page 49)

cExpress-BT2 Page 49
7.3.3.1. AMI Graphics Output Protocol Policy
Feature Options Description
Intel(R) Valley View Graphics Controller Info only
Intel(R) GOP Driver Info only
Output Select
[List connect device] CRT Output Interface.
Brightness Setting
[LFP device connect only] 255 Set GOP Brightness value
BIST Enable Enabled
Disabled Starts or stops the built-in self-test (BIST) on the integrated display
panel.
7.3.4. SATA
Feature Options Description
SATA Info only
SATA Controller(s) Enabled
Disabled Enable/Disable Serial ATA.
SATA Mode Selection IDE Mode
AHCI Mode Select IDE/AHCI
SATA Test Mode Enabled
Disabled Test Mode enable/disable
SATA Controller Speed Gen1
Gen2 SATA speed support Gen1 or Gen2.
SATA Port Configuration Submenu
7.3.4.1. SATA > SATA Port Configuration
Feature Options Description
SATA Port Configuration Info only
Port X Disabled
Enabled Enable/Disable SATA port X.
HotPlug Enabled
Disabled Enable/Disable SATA port X hotplug.
7.3.5. USB
Feature Options Description
USB Info only
USB Module Version Info only
USB Devices Info only Drives, keyboards, mouse, hubs
Legacy USB Support Enabled
Disabled
Auto Enables legacy USB support.
Auto option disables legacy support if no USB devices are
connected.
Disable option will keep USB devices available only for EFI