ADLINK cExpress-BT2 - Manual (Page 55)

cExpress-BT2 Page 55
7.3.11.1. Serial Port Console > Console Redirection Settings
Feature Options Description
COM0/COM1
Console Redirection Settings Info only
Terminal Type VT100
VT100+
VT-UTF8
ANSI VT100: ASCII char set.
VT100+: Extends VT100 to support color, function keys, etc.
VT-UTF8: Uses UTF8 encoding to map Unicode chars onto 1 or
more bytes.
ANSI: Extended ASCII char set.
Bits per second 9600
19200
38400
57600
115200 Selects serial port transmission speed. The speed must be
matched on the remote computer. Long or noisy lines may
require lower speeds.
Data Bits 7
8 Select data bits.
Parity None
Even
Odd
Mark
Space Select parity.
Stop Bits 1
2 Select number of stop bits.
Flow Control None
Hardware RTS/CTS Select flow control.
VT-UTF8 Combo Key Support Disabled
Enable Enable VT-UTF8 combination key support for ANSI/VT100
terminals.
Recorder Mode Disabled
Enable With this mode enabled only text will be sent. This is to capture
terminal data.
Resolution 100x31 Disabled
Enable Enables or disables extended terminal resolution
Legacy OS Redirection 80x24
80x25 On legacy OSes, the number of rows and columns supported by
redirection
Putty KeyPad VT100
LINUX
XTERMR6
SCO
ESCN
VT400 Select FunctionKey and KeyPad on Putty.
Redirection After BIOS Post Always Enabled
BootLoader The Settings specify if BootLoader is selected, then legacy
console redirection is disabled before booting to legacy OS.
Default value is Always Enable which means legacy console
redirection is enabled for legacy OS.
7.3.12. Thermal
Feature Options Description
Thermal Info only
CPU Temperature Info only
Critical Trip Point Disabled
85 C
95 C This value controls the temperature of the ACPI Critical Trip Point -
the point at which the OS will shut the system down.
Active Cooling Trip Point Disabled
40 C Active Cooling Trip Point.