ADLINK cExpress-BT2 - Manual (Page 51)

cExpress-BT2 Page 51
7.3.7. PCI and PCIe
Feature Options Description
PCI and PCIe Info only
PCI Common Settings Info only
PCI Latency 32 PCI Bus Clocks
64 PCI Bus Clocks
96 PCI Bus Clocks
128 PCI Bus Clocks
160 PCI Bus Clocks
192 PCI Bus Clocks
224 PCI Bus Clocks
248 PCI Bus Clocks Value to be programmed into PCI latency timer register.
VGA Palette Snoop Disabled
Enabled Enables or Disables VGA palette registers snooping.
PERR# Generation Enabled
Disabled Enable or Disable the PCI Express port 1 in the chipset.
SERR# Generation Enabled
Disabled Enables or Disables PCI Device to generate SERR#.
PCI Express Settings Info only
Relaxed Ordering Disabled
Enabled
Enables or Disables PCI Express device relaxed ordering.
Extended Tag Disabled
Enabled If Enabled, allows device to use 8-bit tag field as a requester.
No Snoop Disabled
Enabled Enables or Disables PCI Express device No Snoop option.
Maximum Payload Auto
128 Bytes
256 Bytes
512 Bytes
1024 Bytes
2048 Bytes
4096 Bytes Set maximum payload of PCI Express device or allow system BIOS
to select the value.
Maximum Read Request Auto
128 Bytes
256 Bytes
512 Bytes
1024 Bytes
2048 Bytes
4096 Bytes Set maximum read request size of PCI Express device or allow
system BIOS to select the value.
PCI Express Link Register Settings Info only
ASPM Support
WARNING: Enabling ASPM may cause some
PCI-E devices to fail
Disabled
Auto
Force L0s Set the ASPM Level: Force L0s - Force all links to L0s
Auto - BIOS auto configure
Disabled - Disables ASPM
Extended Synch Disabled
Enabled If enabled, allows generation of Extended Synchronization patterns.
Link Training Retry Disable
2
3
5 Defines number of retry attempts software will take to retrain the
link if previous training attempt was unsuccessful.
Link Training Timeout (Us) 1000 Defines number of microseconds software will wait before polling
'Link Training' bit in Link Status register. Value range from 10 to