ADLINK ETX-PVR - Manual (Page 16)

Chapter 2 Product Overview
10 Reference Manual ETX-PVR
Figure 2-5. Component Locations (Bottom Side)
Connector and Socket Definitions
Table 2-2 describes the connectors and sockets shown in Figures 2-6 and 2-7 .
Table 2-2. Connector and Socket Descriptions
Jack # Name Description
J1 ETX X1 (on
bottom side of
the board; see
Figure 2-7 .)
Standard 100-pin, 0.6 mm Hirose connector for PCI, Audio, and USB signals
J2 ETX X2 (on
back of the
board; see
Figure 2-7 .)
Standard 100-pin, 0.6 mm Hirose connector for ISA signals
J3 ETX X3 (on
back of the
board; see
Figure 2-7 .)
Standard 100-pin, 0.6 mm Hirose connector for video, serial, keyboard and
mouse, and parallel/floppy drive signals
Key:
U9 - Super I/O
U11 - HD Audio
U12 - Ethernet
U14 - SSD
U19 - Board Controller
U37 - SPI Flash
U14
U9
ETX-PVR_Bottom_Comp_a
U11
U19
U37
U12