ADLINK ETX-PVR - Manual (Page 60)

Chapter 4 BIOS Setup
54 Reference Manual ETX-PVR
• APIC ACPI SCI IRQ [Disabled; Enabled]
• USB Device Wakeup From S3/S4 [Disabled; Enabled]
• High Performance Event Timer [Disabled; Enabled]
• HPET Memory Address [FED00000h; FED01000h; FED02000h; FED03000h]
• ACPI OS shutdown mode [ATX; AT]
• Restore on AC Power Loss [Power Off; Power On; Last State]
 Hardware Health Configuration
• CPU Temperature XX°C / XXX°F
BIOS Boot Setup Screen
Figure 4-4. BIOS Boot Setup Screen
• Boot Settings
 Boot Settings Configuration
• Quick Boot [Disabled; Enabled]
• Quiet Boot [Disabled; Enabled]
• AddOn ROM Display Mode [Force BIOS; Keep Current]
• Boot Num-Lock [Off; On]
• PS/2 Mouse Support [Disabled; Enabled; Auto]
• Wait For ‘F1’ If Error [Disabled; Enabled]
• Hit ‘DEL’ Message Display [Disabled; Enabled]
• Interrupt 19 Capture [Disabled; Enabled]
Main Advanced Power Boot Security Exit
BIOS Setup Utility
Boot Settings
Select Screen
Select Item
Enter Go to Sub screen
F1 General Help
F10 Save and Exit
ESC Exit
VXX.XX (C) Copyright 1985-20XX, American Megatrends, Inc.
1st Boot Device [Removable Dev.]
Onboard Lan Boot ROM [Enabled]
2nd Boot Device [CD/DVD]
3rd Boot Device [SATA: SS-4GB NANDri]
4th Boot Device [USB]
5th Boot Device [Network]
Hard Disk Drives
Removable Drives
CD/DVD Drives
USB Drives
Network Drives
Boot Settings Configuration
Configure Settings
during System Boot
ETX-PVR_BIOS_Boot_a