ADLINK MXC-6000 Series - Manual (Page 62)

50 Getting Started
2. Slide the fan module back until USB connection is
secured, as shown.
3. Replace the thumbscrew.
2.9 Cooling Configuration
Heat-generating components of the MXC-6000 series controller
(such as CPU and PCH) are all situated on the left side of the sys-
tem. These components directly contact the heat sink via thermal
pads and dissipate heat generated by the components. To maxi-
mize efficiency of heat dissipation, maintain a minimum of 2
inches (5 cm) clearance on the top of the MXC-6000 controller.