ADLINK MXC-6000 Series - Manual (Page 67)

Power Consumption 55
MXC-6000
Appendix A: Power Consumption
A.1 Power Consumption Reference
Power consumption as follows is based on lab data in which 24V
DC is applied and current is measured by the DC power supply.
The power consumption (W) is calculated as the product of
applied voltage (V) and the current (A).
Platforms tested for this data have available external I/O inter-
faces, and are attached to supported devices such as VGA/DVI/
LVDS monitor, CF card, PS2 keyboard/mouse, USB dummy load
(5VDC 500mA), external SATA , COM loopback, and audio loop-
back, and an internal hard disk driver is installed.
No internal PCI/PCIe/mini PCIe slots are occupied.
Information is presented for reference only. Actual power con-
sumption will vary with different attached devices and platform
operations.
Table A-1: Power Consumption
NOTE: NOTE:
Information in this Appendix is for power budget planning and
design purposes only. Actual power consumption may differ
based on final application.
Power Off System Idle
System Full
Load Recommended
Power Supply
Consumption 0.72 W 41.28 W 78.72 W 100W
Notes In
shutdown
status with
DC input,
only PS2
keyboard/
mouse are
connected Under
Windows XP
desktop
without
executing
any
application
program Under
Windows XP
with 100%
CPU
utilization
and
accessing all
I/O devices
simultaneous
ly Additional power
supply is required if
add-on cards are
installed