ADLINK MXC-6000 Series - Manual (Page 66)

54 Driver Installation
To install the WDT driver for the MXC-6000 series controller:
1. Close any running applications.
2. Insert the ADLINK All-in-One DVD. The WDT driver is
located in the directory:
x:\Driver Installation\Matrix\MXC-6000\WDT\
where x: denotes the DVD-ROM drive.
3. Execute Setup.exe and follow onscreen instructions to
complete the setup.
4. After installation is complete, reboot the system.
3.6 Installing the DIO Driver
The MXC-6000 Digital I/O function uses ADLINK's PCI-7230 Win-
dows driver package, available on the inlcuded MXC-6000 driver
CD and, alternatively, downloadable at ADLINK's MXC-6000 web
support page. 16 channel DI and 16 channel DO are both avail-
able.
To install the DIO driver:
1. Close any running applications.
2. Locate the Setup.exe file in the ADLINK All-in-One DVD
or downloaded driver package.
3. Execute Setup.exe and follow onscreen instructions to
complete the setup.
4. After installation is complete, reboot the system.