ADLINK IMB-T10 - Manual (Page 16)

4 Introduction
Table 1-1: IMB-T10 General Specifications
I/O Interfaces
Serial ATA • 2x SATA 3 Gb/s, one shared with mSATA (selected by
jumper)
• 1x mSATA SSD module (Mini-PCIe Full Card form
factor), mSATA SATA shared with PCIe /USB2.0
Onboard I/O • 7x USB 2.0 (4x external, 3x by pin header), one
additional USB 2.0 pin header is available only when
Mini-PCIe card USB 2.0 is not occupied
• 9x RS-232 serial ports (1x external, 8x by pin header),
1x RS-232/422/485 (selected by jumper)
Rear I/O • 2x RJ-45 LAN ports
• 4x USB 2.0 ports
• 1x RS-232 serial port; 1x RS-232/422/485 (COM1)
• 1x D-Sub VGA connector
• 1x HDMI connector
• 1x screw type DC Jack
• 2x audio jacks (line-out and mic-in)
SIM Card • SIM card slot onboard
Expansion Slots • 1x Mini-PCIe full card support
(shared with USB 2.0, mSATA)
• 1x PCI slot
• 1x PCIe x1 slot compliant with PCI Express Base 1.0a
specification (only for flying cable solution due to slot
location limitation)
Power
DC Power • 1x Screw type DC-Jack
• +12V DC-in
Mechanical and Environment
Form Factor • Mini-ITX Embedded Motherboard
Dimensions • 170 mm x 170 mm (L x W)
Operating Temp. • 0°C to 60°C
Storage Temp. • -20ºC to 80ºC
Rel. Humidity • 10 - 90% RH
Safety • CE, FCC Class A