ADLINK IMB-T10 - Manual (Page 49)

BIOS Setup 37
IMB-T10
4.3.2 CPU Configuration
LVDS1 Panel Type Selection
Use this to select LVDS1 panel type. The default value is
[1366x768/18- bit/1-ch/LED].
LVDS2 Panel Type Selection
Use this to select LVDS2 panel type. The default value is
[1366x768/18- bit/1-ch/LED].
Primary Graphics Adapter
This allows you to select the boot graphic adapter priority. The
default value is [VBIOS Default].
ACPI HPET Table
Use this option to enable or disable ACPI HPET Table. The default
value is [Enabled]. Please set this option to [Enabled] if you plan to
use this motherboard to submit Windows® certification.