ADLINK IMB-T10 - Manual (Page 40)

28 Getting Started
3.3 Installation of Memory Modules (SO-DIMM)
This motherboard provides one 204-pin DDR3 (Double Data Rate
3) SO-DIMM slot.
Step 1. Align a DIMM on the slot such that the notch on the DIMM
matches the break on the slot.
Step 2. Firmly insert the DIMM into the slot until the retaining clips
at both ends fully snap back in place and the DIMM is properly
seated.
3.4 Expansion Slots (PCI, PCI Express and
Mini-PCIe/mSATA)
This motherboard has 1 PCI slot, 1 PCI Express slot, and 1
Mini-PCIe/mSATA slot.
PCI slot: PCI slot is used to install expansion cards that have the
32-bit PCI interface.
PCIE slot: PCIE1 (PCIE x1 slot) is used for PCI Express x1 lane
width graphics cards.
Mini-PCIe/mSATA slot: MINI_PCIE1 (Mini-PCIe/mSATA slot; full
size) is used for PCI Ex- press mini cards or mSATA cards.
WARNING:
The DIMM only fits in one orientation. Forcing the DIMM into
the slot It will cause permanent damage to the motherboard
and the DIMM.